Page Comparison

NOTE:

•   Run this command in Linux shell.

•   To run this command, you need root privileges.

•   The default setting is 6x40G_QSFP.

•   After changing the port mapping mode, you need to restart PICOS to make the setting take effect.

•   Manually remove the user configuration files /pica/config/pica_startup.boot and /pica/config/pica.conf after changing port mapping mode and before restarting PICOS. Be cautious that all the user configurations will be lost after these operations. We suggest you backup the configuration file before proceeding with these operations.

• Under SFP mode, port names look like qe-1/1/x.1 ~ qe-1/1/x.4. For example, qe-1/1/25 is broken into qe-1/1/25.1, qe-1/1/25.2, qe-1/1/25.3 and qe-1/1/25.4.

• Hardware limitation – if power cycle the switch, wait for 10 - 30 seconds before power on.