Versions Compared

Version Old Version 8 New Version 9
Changes made by

Tracy Yang

Tracy Yang

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Table of Contents

...

NOTE：

  •   You need to log in through the console port of the switch and perform the ONIE installation described in this section.
  •   The installation method described in this section only applies to platforms that have pre-installed ONIE.

Mind Map of Installation Process

Figure1 shows the mind map of PicOS installation process.

...

Usage of nos-boot-mode command:

admin@Xorplus$sudo nos-boot-mode                            

USAGE

    install or uninstall NOS(es)

SYNOPSIS

    nos-boot-mode [install|uninstall]

DESCRIPTION

    install- Install NOS

uninstall- Remove all NOS(es) including PICOS

When nos-boot-mode install command is executed, PICOS will switch to ONIE install mode, and the user should go on to complete the subsequent installation. The steps for the manual installation process and the automatic installation process using the nos-boot-mode install command are described below.

When nos-boot-mode unsinstall command is executed, the system will remove all NOS(es) including PICOS from the device. Therefore, it is suggested to use the nos-boot-mode unsinstall command with caution.

Manual Installation Process

Step1         Make sure that the installation package of .bin file has been loaded to the server (server   could be HTTP, TFTP, or an FTP server or the switch local directory depending on the actual installation environment).

...

Code Block
admin@XorPlus$version
Copyright (C) 2009-20182019 Pica8, Inc.
===================================
Hardware Model                : as7312_54x
Linux System Version/Revision    : 3.1.0/4b5f523
Linux System Released Date       : 11/27/2018
L2/L3 Version/Revision           : 3.1.0/4b5f523
L2/L3 Released Date              : 11/27/2018
OVS/OF Version/Revision         : 3.1.0/4b5f523
OVS/OF Released Date          : 11/27/2018

...