...
We can configure port breakout for all 40GE or 100GE interfaces, also we can configure port breakout for part of the 40GE or 100GE interfaces of the switch, the two procedures are different.
Configuring Port Breakout for All Interfaces
We can configure qe-interface-mode to SFP mode to breakout all 40GE or 100GE interfaces.
...
Step3 Verify the configuration.l
- run run
...
- show interface qe-interface-mode to check the qe-interface-mode.
| Code Block |
|---|
admin@XorPlus# run show interface qe-interface-mode |
...
qe-interface-mode:SFP |
...
- After system startup, run run show interface brief command to view the interface information. We can see that all 40GE and 100GE ports have been split.
| Code Block |
|---|
admin@XorPlus# run show interface |
...
Interface Management Status Flow Control Duplex Speed Description
brief Interface Management Status Flow Control Duplex Speed Description ---------- |
...
---------- |
...
------ |
...
------------ |
...
------ |
...
------- |
...
------------------------------ |
...
te-1/1/1 Enabled Down Disabled Full Auto
te-1/1/2 Enabled Down Disabled Full Auto
te-1/1/3 Enabled Up Disabled Full 10Gb/s
te-1/1/4 Enabled Up Disabled Full 10Gb/s
te-1/1/5 Enabled Up Disabled Full 10Gb/s
te-1/1/6 Enabled Up Disabled Full 10Gb/s
te-1/1/7 Enabled Up Disabled Full 10Gb/s
te-1/1/8 Enabled Up Disabled Full 10Gb/s
te-1/1/9 Enabled Up Disabled Full 10Gb/s
te-1/1/10 Enabled Up Disabled Full 10Gb/s
te-1/1/11 Enabled Up Disabled Full 10Gb/s
te-1/1/12 Enabled Up Disabled Full 10Gb/s
te-1/1/13 Enabled Up Disabled Full 10Gb/s
te-1/1/14 Enabled Up Disabled Full 10Gb/s
te-1/1/15 Enabled Up Disabled Full 10Gb/s
te-1/1/16 Enabled Up Disabled Full 10Gb/s
te-1/1/17 Enabled Up Disabled Full 10Gb/s
te-1/1/18 Enabled Up Disabled Full 10Gb/s
te-1/1/19 Enabled Up Disabled Full 10Gb/s
te-1/1/20 Enabled Up Disabled Full 10Gb/s
te-1/1/21 Enabled Up Disabled Full 10Gb/s
te-1/1/22 Enabled Up Disabled Full 10Gb/s
te-1/1/23 Enabled Up Disabled Full 10Gb/s
te-1/1/24 Enabled Up Disabled Full 10Gb/s
qe-1/1/25.1 |
...
Enabled Up Disabled Full 10Gb/s qe-1/1/25.2 |
...
Enabled Up Disabled Full 10Gb/s qe-1/1/25.3 |
...
Enabled Up Disabled Full 10Gb/s qe-1/1/25.4 |
...
Enabled Up Disabled Full 10Gb/s qe-1/1/26.1 |
...
Enabled Down Disabled Full Auto qe-1/1/26.2 |
...
Enabled Down Disabled Full Auto qe-1/1/26.3 |
...
Enabled Down Disabled Full Auto qe-1/1/26.4 |
...
Enabled Down Disabled Full Auto qe-1/1/27.1 |
...
Enabled Up Disabled Full 10Gb/s qe-1/1/27.2 |
...
Enabled Up Disabled Full 10Gb/s qe-1/1/27.3 |
...
Enabled Up Disabled Full 10Gb/s qe-1/1/27.4 |
...
Enabled Up Disabled Full 10Gb/s qe-1/1/28.1 |
...
Enabled Up Disabled Full 10Gb/s qe-1/1/28.2 |
...
Enabled Up Disabled Full 10Gb/s qe-1/1/28.3 |
...
Enabled Up Disabled Full 10Gb/s qe-1/1/28.4 |
...
Enabled Up Disabled Full 10Gb/s qe-1/1/29.1 |
...
Enabled Down Disabled Full Auto qe-1/1/29.2 |
...
Enabled Down Disabled Full Auto qe-1/1/29.3 |
...
Enabled Down Disabled Full Auto qe-1/1/29.4 |
...
Enabled Down Disabled Full Auto qe-1/1/30.1 |
...
Enabled Up Disabled Full 10Gb/s qe-1/1/30.2 |
...
Enabled Up Disabled Full 10Gb/s qe-1/1/30.3 |
...
Enabled Up Disabled Full 10Gb/s qe-1/1/30.4 |
...
te-1/1/31 Enabled Up Disabled Full 10Gb/s
te-1/1/32 Enabled Up Disabled Full 10Gb/s
te-1/1/33 Enabled Up Disabled Full 10Gb/s
te-1/1/34 Enabled Up Disabled Full 10Gb/s
te-1/1/35 Enabled Up Disabled Full 10Gb/s
te-1/1/36 Enabled Up Disabled Full 10Gb/s
te-1/1/37 Enabled Up Disabled Full 10Gb/s
te-1/1/38 Enabled Up Disabled Full 10Gb/s
te-1/1/39 Enabled Up Disabled Full 10Gb/s
te-1/1/40 Enabled Up Disabled Full 10Gb/s
te-1/1/41 Enabled Up Disabled Full 10Gb/s
te-1/1/42 Enabled Up Disabled Full 10Gb/s
te-1/1/43 Enabled Up Disabled Full 10Gb/s
te-1/1/44 Enabled Up Disabled Full 10Gb/s
te-1/1/45 Enabled Up Disabled Full 10Gb/s
te-1/1/46 Enabled Up Disabled Full 10Gb/s
te-1/1/47 Enabled Up Disabled Full 10Gb/s
te-1/1/48 Enabled Up Disabled Full 10Gb/s
te-1/1/49 Enabled Up Disabled Full 10Gb/s
te-1/1/50 Enabled Up Disabled Full 10Gb/s
te-1/1/51 Enabled Up Disabled Full 10Gb/s
te-1/1/52 Enabled Up Disabled Full 10Gb/s
te-1/1/53 Enabled Up Disabled Full 10Gb/s
te-1/1/54 Enabled Up Disabled Full 10Gb/s
...
Enabled Up Disabled Full 10Gb/s |
Configuring Port Breakout for Part of the Interfaces
We can change qe-interface-mode from QSFP to FLEX mode, then breakout part of the 40GE or 100GE interfaces under FLEX mode as required.
Step1 Change qe-interface-mode from QSFP to FLEX mode.
a a) Change qe-interface-mode from QSFP to FLEX mode.
...
| Code Block |
|---|
admin@XorPlus# set interface qe-interface-mode FLEX |
NOTE: If the current qe-interface-mode is SFP mode, you need to change the port mode to QSFP mode first. |
b b) Restart PICOS to make the setting take effect.
...
| Code Block |
|---|
admin@XorPlus:~$ sudo /etc/init.d/picos restart |
Step2 In flexible mode, split the port as required.
...
a) Split the port as required.
set interface gigabit-ethernet <port-name> breakout <10g-4x | 25g-4x | donot>
NOTE: | l
| l
|
b) Restart PICOS to make the setting take effect.
...
| Code Block |
|---|
admin@XorPlus:~$ sudo /etc/init.d/picos restart |
Step3 Verify the configuration.
...
- Use run show interface qe-interface-mode command to check the qe-interface-mode.
| Code Block |
|---|
admin@XorPlus# run show interface qe-interface-mode |
...
qe-interface-mode:FLEX |
...
- After system startup, run run show interface brief command to view the interface information
...