Versions Compared

Version Old Version 3 New Version 4
Changes made by

Tracy Yang

Tracy Yang

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Info
titleNOTE:

  • Only the L3 VLAN interface in the default VRF can be set as the inband management port. If a VLAN interface has been set as an inband management port, it cannot be bound to other user-defined VRFs.

  • A maximum of four L3 VLAN interfaces in the default VRF can be set as the inband management ports by using set system inband vlan-interface <vlan-interface> command. However, we can use set system inband enable true command to enable the inband management function of all the L3 VLAN interfaces in the default VRF.

The management interface (i.e. eth0) and the inband management ports are used for Out of Band (OOB) and In Band (IB) management respectively. By default, all interfaces, including the management interface (i.e. eth0) and all VLAN interfaces share the default VRF.

...

3.   Set the L3 VLAN interface in the default VRF as the inband management port by using set system inband enable true or set system inband vlan-interface <vlan-interface> command. Note that the inband management port should not be bound to the user-defined VRFs.

...