...
The run show isis database command displays the Link State Database (LSDB) information of IS-IS.
Command Syntax
run show isis [vrf <text> | vrf all] database [detail] [json]
...
Parameter | Description |
|---|---|
vrf <vrf-name> | Optional. Specifies a VRF name. |
Example
- View the Link State Database (LSDB) information of IS-IS.
| Code Block |
|---|
admin@PICOS# run show isis erpsdatabase briefArea Enable: true Version: 2 Tcn-propagation: Yes D: Discarding F: Forwarding R: RPL Owner N: RPL Neighbour FS: Forced Switch MS: Manual Switch Ring ID Instance ID Control VLAN Port0 Port1 ------------------------------------------------------------------------------ 1 1 4001 te-1/1/19(D,R) te-1/1/7(F) 2 2instance1: IS-IS Level-1 link-state database: LSP ID PduLen SeqNumber Chksum Holdtime ATT/P/OL 0000.0000.0004.00-00 * 85 0x00000008 0xb4c0 1018 0/0/0 1 LSPs IS-IS Level-2 link-state database: LSP ID PduLen SeqNumber Chksum Holdtime ATT/P/OL 0000.0000.0004.00-00 * 75 0x00000008 0x3238 1022 0/0/0 1 LSPs admin@PICOS# run show isis database detail Area instance1: IS-IS Level-1 link-state database: LSP ID PduLen SeqNumber Chksum Holdtime ATT/P/OL 0000.0000.0004.00-00 * 85 0x00000008 0xb4c0 983 0/0/0 Protocols Supported: IPv4 Authentication: HMAC-MD5: e51db17eff49ba54af7ebfcd18131cb7 Area Address: 34 MT Router Info: ipv4-unicast MT Router Info: ipv6-unicast TE Router ID: 100.100.100.1 Router Capability: 100.100.100.1 , D:0, S:0 IPv4 Interface Address: 100.100.100.1 Extended IP Reachability: 0.0.0.0/0 (Metric: 333) 1 LSPs IS-IS Level-2 link-state database: LSP ID 4002 PduLen SeqNumber Chksum Holdtime te-1ATT/1/19(F) P/OL 0000.0000.0004.00-00 * 75 0x00000008 0x3238 987 te-10/1/7(F) 30/0 Protocols Supported: IPv4 Authentication: 3 Password: 4f5sf5 Area Address: 34 MT Router 4003 Info: ipv4-unicast MT Router Info: ipv6-unicast TE Router ID: 100.100.100.1 Router te-1/1/19(FCapability: 100.100.100.1 , D:0, S:0 IPv4 Interface Address: 100.100.100.1 Extended IP Reachability: 0.0.0.0/0 (Metric: 0) te-1/1/7(D,R)1 LSPs |