...
| Code Block |
|---|
admin@XorPlus# run show route vrf vrf1
show ip route vrf vrf1
=======================
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, F - PBR,
f - OpenFabric,
> - selected route, * - FIB route, q - queued, r - rejected, b - backup
t - trapped, o - offload failure
VRF vrf1:
S>* 10.10.1.0/24 [1/0] via 172.168.1.3, vlan10, weight 1, 00:00:45
C>* 172.168.1.0/24 is directly connected, vlan10, 00:04:43
C>* 192.168.2.0/24 is directly connected, vlan11, 00:04:45
admin@XorPlus# run show route vrf vrf2
show ip route vrf vrf2
=======================
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, F - PBR,
f - OpenFabric,
> - selected route, * - FIB route, q - queued, r - rejected, b - backup
t - trapped, o - offload failure
VRF vrf2:
S>* 10.10.1.0/24 [1/0] via 172.168.1.3, vlan20, weight 1, 00:00:59
C>* 172.168.1.0/24 is directly connected, vlan20, 00:04:56
C>* 192.168.2.0/24 is directly connected, vlan21, 00:04:59
========================= |
- You can use the run show route forward-route command to check the hardware route forwarding table information of the specific VRF.
...