Page Comparison

The uplink ports, with port numbers from 25 to 30, have two different uplink port modes 6x40G (default) and 4x100G.

• You need to change the port mode to 4x100G if you want to use 100G uplinks, please refer to following page with instructions to set up the port mode:

https://docs.pica8.com/display/PicOS413sp/Configuring+Port+Mapping+On+S4148+Series+Switch

• Ports with physical port number 27 & 28 are only available in the 6x40G mode and are not available in the 4x100G mode.