...
The set routing route-map map set-action ip next-hop command sets the IP address of the next-hop of the route with the value configured in the action clause.
The delete routing route-map set-map action action ip next-hop command restores the default behavior of not modifying the IP address of the next-hop of the route.
...
set routing route-map <route-map-name> order <NUMBER> set-action ip ip next-hop {<ipv4-address>|peer-address|unchanged}
delete routing route-map <route-map-name> name> order <NUMBER> action ip set-action ip next-hop {<ipv4-address>|peer-address|unchanged}
...
Parameter | Description |
route-map <route-map-name> | Specifies the name of the route map. Required. |
order <NUMBER> | Specifies the sequence number of the entry. Required. The value is an integer that ranges from 1 to 65535. |
{<ipv4-address>|peer-address|unchanged} | Specifies the IPv4 address to be set as the next-hop address of the route. |
...
| Code Block |
|---|
admin@Xorplus# set routing route-map GlobalMap order 10 set-action ip next-hop peer-address admin@Xorplus# commit |
...