Run the command set protocol ospf traceoption lsa to enable logging of Link State Advertisement related messages. Three optional keywords generate, flooding, install, or refresh can be used to specify logging for different types of LSA events.
Run the command delete protocol ospf traceoption lsa to remove this configuration.
Command Syntax
set protocol ospf traceoption lsa [generate|flooding|install|refresh]
delete protocol ospf traceoption lsa [generate|flooding|install|refresh]
Parameter
Parameter | Description |
lsa [generate|flooding|install|refresh] | Optional. Specifies to enable LSA logging for generate, flooding, install or refresh. |
Example
- Enable OSPF LSA logging for flooding related information.
| Code Block |
|---|
admin@XorPlus# set protocols ospf traceoption lsa flooding
admin@Xorplus# commit |