...
set protocols bgp [vrf <vrf-name>] neighbor <bgppeer>{neighbor <ip>| peer-group <peer-group> | interface <interface>} disable-connected-check
delete protocols bgp [vrf <vrf-name>] neighbor <bgppeer> {neighbor <ip>| peer-group <peer-group> | interface <interface>} disable-connected-check
Parameter
Parameter | Description |
vrf <vrf-name> | Optional. Specifies a VRF name. The value is a string. It’s a user-defined VRF set by the command set ip vrf <vrf-name> [description <string>]. |
| neighbor <bgppeer>neighbor <ip> | Specifies the IP address of a peer or a Peer-Grouppeer. |
| peer-group <peer-group> | Specifies a peer group. |
| interface <interface> | Specifies an interface for BGP connection. |
Example
• This example allows peerings between directly connected eBGP peers using loopback addresses.
...