...
Parameter | Description |
vrf <vrf-name> | Optional. Specifies a VRF name. The value is a string. It’s a user-defined VRF set by the command set ip vrf <vrf-name> [description <string>]. |
| neighbor {<ip>|<bgppeer>|<interface>} | Neighbor can be an IPv4 address or an IPv6 address or an interface to use for the connection. |
| remote-as {<as-number>|external|internal} | <as-number>: Specifies a 4-byte AS number in asplain format (z), or asdot format (x.y), where z is a number from 1 to4294967295 to 4294967295 and x and y are 16-bit numbers in the range 0 to 65535. external: Create a peer as you would when you specify an ASN, except that if the peers ASN is the same as mine as specified under this command the connection will be denied. internal: Create a peer as you would when you specify an ASN, except that if the peers ASN is different than mine as specified under tis command the connection will be denied. |
Example
• This example specifies a neighbor with an autonomous system (AS) number.
...