...
set protocols bgp [vrf <vrf-name>] [ipv4 unicast|ipv4 labeled-unicast|ipv6 unicast|ipv6 labeled-unicast] neighbor <protocol bgppeer> <bgppeer> route-map <route-map> {in|out}
delete protocols bgp [vrf <vrf-name>] [ipv4 unicast|ipv4 labeled-unicast|ipv6 unicast|ipv6 labeled-unicast] neighbor <protocol bgppeer> <bgppeer> route-map <route-map> {in|out}
Parameter
Parameter | Description |
vrf <vrf-name> | Optional. Specifies a VRF name. The value is a string. It’s a user-defined VRF set by the command set ip vrf <vrf-name> [description <string>]. |
| neighbor |
| <bgppeer> | Specifies |
| the IP address of |
| a peer. | |
| route-map <route-map> | Specifies the name of the route map. |
| {in| |
| out} | Sets the route map policy to apply to either the received routes from the neighbor (in) or the advertised routes to the neighbor (out). |
Example
• This example applies a route map to the incoming routes.
...