...
set protocols bgp [vrf <vrf-name>] [ipv4 unicast|ipv4 labeled-unicast|ipv6 unicast|ipv6 labeled-unicast] neighbor <protocol bgppeer><bgppeer> activate
delete protocols bgp [vrf <vrf-name>] [ipv4 unicast|ipv4 labeled-unicast|ipv6 unicast|ipv6 labeled-unicast] neighbor <protocol bgppeer><bgppeer> activate
Parameter
Parameter | Description |
vrf <vrf-name> | Optional. Specifies a VRF name. The value is a string. It’s a user-defined VRF set by the command set ip vrf <vrf-name> [description <string>]. |
| neighbor |
| <bgppeer> | Specifies |
| the IP address of |
| a peer. |
Example
• This example enables the address-family capability and exchange of information specific to an address family with a BGP neighbor.
...