...
| Info | ||
|---|---|---|
| ||
Enable IP routing function before using this feature, for details please refer to Configuring IP Routing. |
In L2/L3, ECMP is supported. The maximum ECMP outgoing port group is 4*128. If each ECMP route is configured to have up to 4 equal-cost paths, for example, the maximum ECMP outgoing port group support is 128. If each ECMP route is configured to have up to 16 equal-cost paths, the maximum ECMP outgoing port group support is 32. Several different ECMP routes can share the same outgoing port group. After configuring the ECMP equal-cost path maximum, reboot the switch to make it available.
...
Check the static ECMP route for 10.10.51.0/24 in the RIB .
...
with command run show route ipv4.
Configuring ECMP Hash Fields
In the default setting, all fields are hashed by IP-source, port-destination, port-source, and VLAN. Additional fields can be enabled, as shown below:
...