...
c) Configure the IP the L3 VLAN interface:
set set l3-interface vlan-interface interfaceinterface <interface_name> vif <vif_name> name> address <IP_address> prefix-length <prefix_length>
...
| Code Block |
|---|
admin@Switch1# set ip routing enable true admin@Switch1# set vlanl3-interface loopback lo address 3.3.3.3 prefix-length 32 admin@Switch1# set protocols static route 1.1.1.1/32 next-hop 100.30.3.4 |
...
| Code Block |
|---|
admin@Switch2# set ip routing enable true admin@Switch2# set vlanl3-interface loopback lo address 2.2.2.2 prefix-length 32 admin@Switch2# set protocols static route 1.1.1.1/32 next-hop 100.10.2.1 |
...
| Code Block |
|---|
admin@Switch3# set vlans vlan-id 100 l3-interface vlan100 admin@Switch3# set vlans vlan-id 200 l3-interface vlan200 admin@Switch3# set vlans vlan-id 3073 l3-interface vlan3073 admin@Switch3# set vlans vlan-id 4094 l3-interface vlan4094 admin@Switch3# set vlanl3-interface vlan-interface vlan3073 vif vlan3073 address 100.30.3.4 prefix-length 24 admin@Switch3# set vlanl3-interface vlan-interface vlan4094 vif vlan4094 address 100.10.2.1 prefix-length 24 admin@Switch3# set interface gigabit-ethernet te-1/1/2 family ethernet-switching native-vlan-id 100 admin@Switch3# set interface gigabit-ethernet ge-1/1/2 family ethernet-switching port-mode trunk admin@Switch3# set interface gigabit-ethernet ge-1/1/2 family ethernet-switching vlan members 200 admin@Switch3# set interface gigabit-ethernet te-1/1/23 family ethernet-switching native-vlan-id 3073 admin@Switch3# set interface gigabit-ethernet ge-1/1/27 family ethernet-switching native-vlan-id 4094 |
...
| Code Block |
|---|
admin@Switch3# set ip routing enable true admin@Switch3# set vlanl3-interface loopback lo address 1.1.1.1 prefix-length 32 admin@Switch3# set protocols static route 2.2.2.2/32 next-hop 100.10.2.2 admin@Switch3# set protocols static route 3.3.3.3/32 next-hop 100.30.3.3 |
...