Run the command set protocols ospf interface vif network to enable OSPF on an interface and specify a network type. Enabling OSPF on an interface allows the interface to send and receive LSAs. Four different network types can be specified here namely, broadcast, non-broadcast, point-to-multipoint and point-to-point.
To delete this configuration, run the command delete protocols ospf interface vif network
Command Syntax
set protocols ospf interface <vlan-interface> vif <vlan-interface><vlan-interface>network {broadcast|non-broadcast|point-to-multipoint|point-to-point}
delete protocols ospf interface <vlan-interface> vif <vlan-interface> <vlan-interface>network {broadcast|non-broadcast|point-to-multipoint|point-to-point}
...
Parameter | Description | ||||
interface <vlan<vlan-interface>interface> | Specifies the name of the interface. | vif <vlan-interface> | Specifiesthe | VIF interface | name. |
| broadcast | Specifies the OSPF broadcast multi-access network. | ||||
| non-broadcast | Specifies the OSPF NBMA network. | ||||
| point-to-multipoint | Specifies the OSPF point-to-multipoint network. | ||||
| point-to-point | Specifies the OSPF point-to-point network. |
...
| Code Block |
|---|
admin@XorPlus# set protocols ospf interface vlan200 vif vlan200 network point-to-point
admin@Xorplus# commit |
...