Run the command set protocols ospf interface vif cost to set the OSPF link cost for the specified interface. The cost value is set to router-LSA’s metric field and used for SPF calculation. Changing the interface cost causes the OSPF to run the SPF and reissue LSAs.
...
set protocols ospf interface <vlan-interface> vif <vlan-interface> cost <1-65535><vlan-interface>cost <1-65535>
delete protocols ospf interface <vlan-interface> vif <vlan-interface> cost<vlan-interface> cost
Parameter
Parameter | Description |
interface |
<vlan- |
interface> | Specifies the name of the VLAN interface. |
| cost <1-65535> | Specifies the link cost, the value is an integer in the range of 1 to 65535. |
Example
- Configure the OSPF interface vlan200 cost to 5.
| Code Block |
|---|
admin@XorPlus# set protocols ospf interface vlan200 vif vlan200 cost 5
admin@Xorplus# commit |
...