Versions Compared

Version Old Version 2 New Version 3
Changes made by

Tracy Yang

Tracy Yang

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Code Block
admin@XorPlus# set vlans vlan-id 100 l3-interface vlan100
admin@XorPlus# set vlans vlan-id 200 l3-interface vlan200
admin@XorPlus# set vlans vlan-id 300 l3-interface vlan300
admin@XorPlus# set vlans vlan-id 400 l3-interface vlan400
admin@XorPlus# set interface gigabit-ethernet te-1/1/1 family ethernet-switching native-vlan-id 100
admin@XorPlus# set interface gigabit-ethernet te-1/1/2 family ethernet-switching native-vlan-id 200
admin@XorPlus# set interface gigabit-ethernet te-1/1/3 family ethernet-switching native-vlan-id 300
admin@XorPlus# set interface gigabit-ethernet xe-1/1/1 family ethernet-switching native-vlan-id 400
admin@XorPlus# commit
Waiting for merging configuration.
Commit OK.
Save done.
admin@XorPlus# set l3-interface vlan-interface vlan100 address 172.16.1.1 prefix-length 24
admin@XorPlus# set l3-interface vlan-interface vlan200 address 172.16.2.1 prefix-length 24
admin@XorPlus# set l3-interface vlan-interface vlan300 address 172.16.3.1 prefix-length 24
admin@XorPlus# set l3-interface vlan-interface vlan400 address 172.16.4.1 prefix-length 24
admin@XorPlus# commit
Waiting for merging configuration.
Commit OK.
Save done.
admin@XorPlus# set interface stm firewall-table ingress  400
admin@XorPlus# set interface stm ipv4-route 6000
XorPlus#admin@XorPlus# commit  Waiting
for merging configuration.
Commit OK.
Save done.
admin@XorPlus#
XorPlus# set interface gigabit-ethernet te-1/1/1 crossflow enable true
admin@XorPlus# set interface gigabit-ethernet te-1/1/2 crossflow enable true
admin@XorPlus# set interface gigabit-ethernet te-1/1/3 crossflow enable true
admin@XorPlus# set interface gigabit-ethernet xe-1/1/1 crossflow enable true
admin@XorPlus# commit
Waiting for merging
configuration.
Commit OK.
Save done.

Be sure to configure the OSPF interface to work with the OSPF Layer 3 network. 

Code Block
admin@XorPlus# set protocols ospf4 area 0.0.0.0 interface vlan400 vif vlan400 address 172.16.4.1
admin@XorPlus# set protocols ospf4 router-id 1.1.1.1
admin@XorPlus# set policy policy-statement static-to-ospf term t1 from protocol connected
admin@XorPlus# set protocols ospf4 export static-to-ospf
admin@XorPlus# commit Waiting for merging configuration.
Commit OK.
Save done.
admin@XorPlus#

...