...
| Code Block |
|---|
admin@router2# set system hostname "router2" admin@router2# set vlans vlan-id 30 l3-interface "vlan30" admin@router2# set vlans vlan-id 40 l3-interface "vlan40" admin@router2# set interface gigabit-ethernet ge-1/1/3 family ethernet-switching native-vlan-id 30 admin@router2# set interface gigabit-ethernet ge-1/1/5 family ethernet-switching native-vlan-id 40 admin@router2# set vlan-interface interface vlan30 vif vlan30 address 10.10.2.2 prefix-length 24 admin@router2# set vlan-interface interface vlan40 vif vlan40 address 10.10.4.1 prefix-length 24 admin@router2# set protocols ospf router-id 2.2.2.2 admin@router2# set protocols ospf area 0.0.0.2 area-type "stub" admin@router2# set protocols ospf area 0.0.0.2 no-summary admin@router2# set protocols ospf network 10.10.2.0/24 area 0.0.0.2 admin@router2# set protocols ospf network 10.10.4.0/24 area 0.0.0.0 admin@router2# set vlan-interface loopback address 2.2.2.2 prefix-length 32 Commit OK. Save Done. admin@router2# |
Similarly, on Router4, we will run the same command to stop injecting summaries in NSSA area 0.0.0.1.
Configuring Router 4
| Code Block |
|---|
admin@router4# set vlans vlan-id 40 l3-interface "vlan40"
admin@router4# set vlans vlan-id 50 l3-interface "vlan50"
admin@router4# set interface gigabit-ethernet te-1/1/1 family ethernet-switching native-vlan-id 40
admin@router4# set interface gigabit-ethernet te-1/1/2 family ethernet-switching native-vlan-id 50
admin@router4# set vlan-interface interface vlan40 vif vlan40 address 10.10.4.2 prefix-length 24
admin@router4# set vlan-interface interface vlan50 vif vlan50 address 10.10.5.1 prefix-length 24
admin@router4# set protocols ospf router-id 4.4.4.4
admin@router4# set protocols ospf network 10.10.4.0/24 area 0.0.0.0
admin@router4# set protocols ospf network 10.10.5.0/24 area 0.0.0.1
admin@router4# set protocols ospf area 0.0.0.1 area-type nssa
admin@router4# set protocols ospf area 0.0.0.1 no-summary
admin@router4# set protocols ospf network 4.4.4.4/32 area 0
admin@router4# set protocols ospf redistribute static
admin@router4# set vlan-interface loopback address 4.4.4.4 prefix-length 32
Commit OK.
Save done. |