Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

First Level Feature

Secondary Level

Third Level

S5810 Series

S5860 Series

AS9716-32D

N9550-32D

S5870-48T6S-U

S5870-48T6S

S5870-48T6BC-U

S5870-48MX6BC-U

S5870-48T6BC

N5850-48S6Q

N8550-64C

N8560-32C

N8550-48B8C
N8550-32C

N5850-48X6C

N5850-48S6C

S3410 Series

System Management

Hardware management of system FAN and PSU

/

Syslog management

/

Boot diagnose

/

Recover default configuration and password

/

Zero Touch Provisioning (ZTP)

/

System file management

/

User management

/

Support to configure login methods

/

System time management: manual method, NTP, PTP

/

Domain Name System (DNS)

/

Layer 2 Switching Configuration

Ethernet Ports Management Configuration

Enable or disable the Ethernet port.

Configuring port speed.

MTU

Flow control

Flow statistics

Port breakout

Routed Interface and Sub-interface

Routed Interface

Layer 3 VLAN Interface 

Storm Control 

×

Local loopback

Backup port

Link Fault Signaling (LFS)

Forwarding Error Correction  (FEC)

Time Domain Reflectometry (TDR)

Clock and Data Recovery (CDR)

MAC configuration

Static MAC entries and Dynamic MAC Address Learning

Static Link Aggregation (LAG) Configuration

Static LAG

Dynamic LAG (LACP)

Load balancing

Resilient LAG Hashing

×

×

×

×

Symmetric Hash for LAG 

×

MLAG

Basic MLAG
Support IPV6

MLAG Active-Ative

Load balancing
 

MLAG DHCP Snooping

MLAG DHCP relay

MLAG IGMP snooping

MLAG VxLAN

×

×

×

×

MLAG PVST+
 

Port access mode

ACCESS
Trunk
Hybrid 

VLAN

Port-based VLAN

MAC Trace

MAC-based VLAN

×

VLAN mapping

QinQ

×

VLAN registration

GVRP

MVRP

Private VLAN

/

×

Voice VLAN

/

Spanning Tree Protocol

STP

RSTP

MSTP

PVST+

BPDU Filter

BPDU Root Guard

BPDU TCN-Guard

BPDU-Guard

Edge port

Manual forwarding

BPDU Tunneling 

Layer 2 protocol messages such as CDP,  LLDP,  LACP and STP are supported and can be transmitted through BPDU tunnels.

Ethernet Ring Protection Switching (ERPS) 

ERPSv1

ERPSv2

Unidirectional Link Detection (UDLD)

/

Loopback Detection

/

IP Service Configuration Guide

IPv4 Basic Configuration

/

ARP

Static ARP
Dynamic ARP

ARP Proxy

DHCP

DHCP server and DHCP client

DHCP relay and dhcp relay option82

DHCPv6 Relay

DHCP snooping
DHCP snooping trust-port
DHCP snooping option82

DHCPv6 snooping

×

Equal-Cost Multipath Routing (ECMP) 

Max path
Load balancing
Symmetric

Randomized Load Balance

Round-Robin Load Balance

×

VRF

Base VRF

×

Management VRF and VRF Route Leaking

×

IPv6

IPv6 DHCP Relay
IPv6 NDP
IPv6 ECMP
Path MTU Discovery 

IP Routing Configuration

IP addressing

IPv4 Addressing
IPv6 Addressing
SVI
Routed interface

Static routing

IPv4/IPv6 static routing
Multiple nexthop static route

RIP

RIP Network
RIP VRF
RIP timer
RIP passive-interface
Redistribution of static route, connnected route, OSPF2 route and BGP routes into RIP withh route map filtering.

RIPng

RIPng Network
RIP VRF
Redistribution of static route, connnected route, OSPF2 route and BGP routes into RIP withh route map filtering.

OSPF

Single OSPFv2 instance
Single OSPFv2 instance for each VRF
OSPFv2 Multiple instances
Intra- and inter-area routing.
Type 1 and 2 external routing.
Broadcast and P2P interfaces.
Stub areas.
Not so stubby areas (NSSA)
MD5 Authentication.
Redistribution of static route, connnected route, RIP route and BGP routes into OSPFv2 withh route map filtering.
OSPFv2 passive interface

OSPFv2 GR (Graceful Restart)

OSPFv3

Single OSPFv3 instance
Single OSPFv3 instance for each VRF
Intra-and inter-area routing
Type 1 and 2 external routing
Broadcast and P2P interfaces
Stub areas
Redistribution of static route, connnected route, ripng route and BGP routes into OSPFv3 with route map filtering.
OSPFv3 passive interface 

OSPFv3 GR (Graceful Restart)

 √

 √

IPV4IPv4/IPv6 BGP

BGP Autonomous Systems
BGP Route Selection
IBGP and EBGP
BGP Multiple Autonomous System
BGP Peer group
BGP fast-external-failover
BGP update-source
EBGP multihop
BGP route-map
BGP Multipath
BGP Route Aggregation
BGP Dynamic Neighbors
BGP Security
BGP Route Reflector
BGP Community
BGP Unnumbered
Redistribution of static route, connnected route, RIP route and OSPF routes into BGP with route map filtering.

×

IPV4IPv4/IPv6 IS-IS

Network Entity Title (NET)
Enable IS-IS Instance on the Interface
IS-IS Switch Level
IS-IS Authentication: authentication per interface, area authentication and routing domain authentication
IS-IS Overload
IS-IS Attached-bit
Priority for Designated Router Election
IS-IS Passive Interface
IS-IS Hello Interval
Hello-Multiplier for the Neighbor Holding Time
Interval for Sending CSNP Messages
Interval for Sending PSNP Messages
Advertise Default Routes
Introduce External Routes
Adjusting SPF Calculation Time: spf-interval, spf-delay-ietf init-delay, long-delay, holddown, time-to-learn
Configure the Maximum Size of Generated LSPs
Configure the Minimum Interval between Regenerating LSP
Refresh Period for LSPs
Maximum Valid Time for the LSPs

×

Route Map

IP Prefix List
as-path-list
community-list
large-community-list
Route Map Match
Route Map Set
Route Map Call

PBR (Policy-Based Routing)

/

Multicas Configuration

IGMP

IGMPv2 query
IGMPv3 query

×

PIM

PIM SM
Static RP
PIM-SSM
PIM over GRE Tunnel

×

MSDP

PIM-SM Inter-domain Multicast Using MSDP
Anycast RP

×

Multicast routing

Multicast routing and forwarding

×

Multicast VLAN

Multicast VLAN Registration (MVR)

×

IGMP Snooping

IGMPv2 snooping
IGMPv3 snooping
mrouter port
static group
unregistered flood

×

VPN

Generic Routing Encapsulation Protocol (GRE)

/

×

×

×

×

VXLAN

VXLAN

VXLAN

×

×

×

×

EVPN

BGP EVPN

×

High Availability

BFD

Static BFD
Dynamic BFD
Single-Hop BFD
Multi-Hop BFD
BFD for BGP
BFD for OSPF
BFD for PIM-SM

Uplink Failure Detection (UFD)

Uplink Failure Detection

Priority Flow Control (PFC)

/

×

Virtual Router Redundancy Protocol (VRRP)

VRRP Active-Standby
VRRP Active-Active (load-balance)
VRRPv2
VRRPv3
preempt mode
priority
authentication
accept mode

EFM OAM

OAM link discovery
Remote loopback

Lossless Network

PFC, Priority Flow Control

/

×

PFC Wachdog

enable PFC watchdog
detect-interval
restore-action
restore-interval

×

×

×

×

×

ECN, Explicit Congestion Notification

Enable WRED
Set the maximum and minimum thresholds
Set drop probability
Enable ECN

DLB, Dynamic Load Balancing

normal mode of Dynamic Load Balancing for ECMP

×

×

×

×

Security

AAA

Radius Authentication
Radius Authorization
Radius Accounting

TACACS+ Authentication
TACACS+ Authorization
TACACS+ Accounting

Console Login
OUT-band/INBAND Login
Local Authentication
local authentication fallback

NAC

802.1X

MAC authentication

CWA authentication

Web authentication
Host Mode
Server Fail VLAN
Block VLAN
Dynamic VLAN
Fallback to WEB
EAP Packet Exchange
Redirect URL
Change of Authorization (CoA)
Downloadable ACL
Dynamic ACL
session-timeout
Re-authentication

ACL

Match field:
  destination-address-ipv4
  destination-address-ipv6
  destination-mac-address
  destination-port
  ether-type
  first-fragment
  ip
  is-fragment
  protocol
  source-address-ipv4
  source-address-ipv6
  source-mac-address
  source-port
  time-range
  vlan
 ACL-based Traffic Policer
 ACL-based QoS
 ACL-based remarked 

Port Security

Enable or disabel port security

DAI

Trust Port
ARP Packets Validity Checking
User Legitimacy Checking
Dynamic ARP Inspection
ARP Inspection Access List

CoPP

System pre-defined control plane protocols
Change the pre-defined CoPP policies
System customize-defined control plane protocols

IPv4SG (IPv4 Source Guard)

IPv4 Source Guard

IPv6SG (IPv6 Source Guard)

IPv6 Source Guard

×

DHCPv6 Guard

/

×

QoS Service Configuration

Queue scheduler

Queue scheduler: SP WRR WFQ

Traffic policing

Traffic policing:
guaranteed-rate
max-rate
Traffic classifier 

Congestion management and avoidance

Congestion management:WRED
Congestion avoidance: ECN

Network Management and Monitoring

SNMP

SNMP v2

SNMP v3

SNMP Access control
SNMP authentication
SNMP privacy
SNMP Trap
SNMP VRF

RESTCONF

/

Remote Network Monitoring (RMON)

Ethernet statistics function (etherStatsTable in RMON MIB)

History statistics function (etherHistoryTable in RMON MIB)

Event definition function (eventTable and logTable in RMON MIB)

Alarm threshold setting function (alarmTable in RMON MIB)

NETCONF

/

×

LLDP

LLDP Mode
Selecting Optional TLVs

LLDP med

POE

(Only supported on devices with 'P' or 'U' in their names)

PoE threshold-mode
PoE max-power
power management-mode
PoE power mode
PoE over LLDP Power Negotiation

-

-

-

-

-

-

-

Mirror Configuration

Local port mirror

ERSPAN

x

Base ACL ERSPAN

x

Switch Environment monitor

boot-messages
 connections
 cpu-usage
 fan
 hwinfo
 memory-usage
 processes
 rollback
 rpsu
 serial-number
 temperature

Packet Capture

tcpdump

Telemetry Protocol

/

SDN

Openflow

sFlow

collector udp port
source address
header length
sampling rate