Versions Compared

Version Old Version 1 New Version 2
Changes made by

Tracy Yang

Tracy Yang

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Here is the configuration relation diagram in SNMPv3.A user can be added to a group or not as you need.Once a user joined a group,one or more kinds of views (notfiy-view, write-view, read-view) must be configured.Besides, configurations on user change with the security-level of the group as below 3 diagrams. Note notify-view,write-view and read-view are optional but you have to choose at least one view.In the below diagram,view1,view2,view3 can be the same or different.

 

Info
titleNOTE:

Once created, the loopback interface will always remain UP. Unlike any VLAN interface which can go down accidentally, the loopback interfaces are more stable and hence a much better choice for the SNMP configuration.
If the Pica8 switch is used as an SNMP Agent device and communicates with the SNMP NMS through the inband port, it is highly recommended to use the IP address of the route reachable loopback interface on the Pica8 switch as the communication address for Snmpwalk, which will ensure that communication is not interrupted and provide stablibility to the SNMP process.

         

Configuring Basic Information

...