Page Comparison

Info

title	NOTE:

This command is not available for S5810-48TS-P, S5860-24XB-U, S3410L-24TF-P, S3410C-16TMS-P, S3410C-16TF-P, S3410C-16TMS-P and S3410C-8TMS-P series switches:

On N3248PXE-ON, all the RJ45 ports of the switch support UPoE. For these UPoE ports, the maximum output power is 99 watts.
On N3248P-ON, all the RJ45 ports of the switch support PoE but not UPoE, the maximum output power of each port is 30 watts.
On N3224PX-ON, all the RJ45 ports of the switch support UPoE. For these UPoE ports, the maximum output power is 99 watts.
On N3224P-ON, all the RJ45 ports of the switch support PoE but not UPoE, the maximum output power of each port is 30 watts.
On S5860-24XB-U, all the RJ45 ports of the switch support UPoE. For these UPoE ports, the maximum output power is 90 watts.
On S3410L-24TF-P, all the RJ45 ports of the switch support PoE, the maximum output power of each port is 30 watts.
On S3410C-8TMS-P, only the first eight RJ45 ports of the switch support PoE, the maximum output power of each port is 30 watts.

...

Parameter

Description

interface{< interface-name > | all}

Specifies interface name. The value could be ge-1/1/1 to ge-1/1/48, all indicates a global configuration that sets a same maximum output power on all RJ45 ports.

max-power <integer>

Specifies maximum output power of a port. The value is an integer, the unit is watt.

On AS4610-30P and AS4610-54P,
- Only the last 8 RJ45 ports of the switch, which are, ge-1/1/17 - ge-1/1/24 on AS4610-30P, ge-1/1/41 - ge-1/1/48 on AS4610-54P, support UPoE.
- For UPoE ports the range is from 1W to 51W, for other ports the range is from 1W to 32W. The default value is 16W.
On AS4630-54NPE/AS4630-54PE, the first 48 RJ45 ports on the front panel support UPoE. For these UPoE ports, the maximum output power can be set up to 90 watts, the default value is 30 watts.
On AS4625-54P, the 48 x 1G RJ45 ports on the front panel support PoE. Port1~Port40 support supports IEEE802.3at/af, the maximum output power supported is up to 30 watts, Port41~Port48 support IEEE802.3bt standard, the maximum output power supported is up to 90 watts.
On S5860-24MG-U, the 24 x 10G RJ45 ports on the front panel support UPoE. For these UPoE ports, the maximum output power can be set up to 90 watts.
On S5860-48XMG-U, the first 48 x 10G RJ45 ports on the front panel support PoE, only the first 24 x 10G RJ45 ports on the front panel support UPoE. For these UPoE ports, the maximum output power supported is up to 90 watts. For other PoE ports, the maximum output power supported is 30 watts.
On S3410-24TS-P, the 24 x 1G RJ45 ports on the front panel support PoE. For these PoE ports, the maximum output power can be set up to 30 watts.
On S3410C-8TMS-P, the 2x5G 2 x 5G and first 6x1G 6 x 1G RJ45 ports on the front panel support PoE. For these PoE ports, the maximum output power can be set up to 30 watts.

...

Code Block
admin@Xorplus# set poe interface ge-1/1/7 max-power 30 admin@Xorplus# commit

Versions Compared

Old Version 7

New Version Current

Key