...
System LED Definition
LED | Color | Mode |
Power Supply 1 | Red | Error/Failure/Bad |
Green | Good | |
Off | Not present | |
Power Supply 2 | Red | Error/Failure/Bad |
Green | Good | |
Off | Not present | |
FANs | Red | Error/Failure/Bad |
Green | Good | |
Diag | Red | Error/Fault/Failure |
Green | Good | |
Blinking | System boot in progress | |
LOC | Not supported. |
Port LED Definition
SFP28 Port LED Definition
LED | Color | Mode |
SFP28 Port LED | On/Flashing | SFP28 port has a valid link at 25G. |
On/Flashing | SFP28 port has a valid link at 10G. | |
OFF | There is no link on the port. |
QSFP28 Port LED Definition
LED | Color | Mode |
LED 1~4 | On/Flashing | QSFP28 port has a valid link at 100G. |
OFF | There is no link on the port. | |
On/Flashing | QSFP28 port has a valid link at 40G. | |
OFF | There is no link on the port. | |
On/Flashing | QSFP28 port has a valid link at 25G via |
break out cable. The LED on 100G QSFP |
end is also present OFF. Flashing indicates |
activity. (With Breakout cable) | |
OFF | There is no link on the port. |
On/Flashing | QSFP28 port has a valid link at 10G via |
break out cable. The LED on 40G QSFP |
end is also present OFF. Flashing indicates |
activity. (With Breakout cable) | |
OFF | There is no link on the port |
SFP+ Port LED Definition
LED | Color | Mode |
SFP+ Port LED | On/Flashing |
Green | SFP+ port has a valid link at 10G. |
Flashing indicates activity. |
On/Flashing |
Yellow | SFP+ port has a valid link at 1G. |
Flashing indicates activity. | |
OFF | There is no link on the port. |
Management Port LED
LED | Color | Mode |
MGMT Port |
LED | On |
Green | Port has a valid link |
Flashing |
Yellow | Flashing indicates activity |
OFF | There is no link on the port. |