...
The set interface gigabit-ethernet breakout command breaks out the 40GE, 100GE, 200GE and 400GE interfaces into four sub-split interfaces. The 40GE interface is split into four 10GE interfaces; the 100GE interface is split into four 25GE interfaces; the 200GE interface is split into four 50GE interfaces; the 400GE interface is split into four 100GE interfaces.
NOTEs: - Restart PICOS after committing this command to make the setting take effect.For 400GE and 200GE interfaces, after executing this command, you can furtherly configure the breakout type through command set interface gigabit-ethernet breakout-type. For details, see Configuring set interface gigabit-ethernet breakout-type.
- When performing the port breakout and merge operation, before restarting the system, you need to manually delete the configurations of the unavailable interfaces, to make sure that the configuration file can be loaded normally when the system boots up.
- From PICOS 3.7.3.4, AS7726_32X supports splitting a 100G port into 2x50G or 4x25G or 4x10G ports using command set interface gigabit-ethernet <port-name> breakout true and set interface gigabit-ethernet breakmap under L2/L3 mode.
|
Command Syntax
set interface gigabit-ethernet <port-name> breakout <true | false>
...