Versions Compared

Version Old Version 1 New Version 2
Changes made by

Jennifer Xiao

Jennifer Xiao

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  1. Log in to the AmpCon-DC UI, and click Service > System Config.

  2. Click the + icon. The Add New System Config page opens.

  3. Enter the information：

    1. Configuration Name: The name of the configuration.

    2. Device Default Login User: The default user name of the switch (admin).

    3. Device Default Password: The default password of the default user (pica8). Device Default Login User + Device Default Password are used to access the switches.

    4. License Portal URL: https://license.pica8.com

    5. License Portal User: The user ID for the License Portal.

    6. License Portal Password: The password of the user for the License Portal. License Portal URL + License Portal User + License Portal Password are used to send requests to the License Portal.

    7. Security Config File: The .txt file with PICOS security-related set CLIs. Before configuring and using a switch, the switch needs to be configured with an initial security configuration to eliminate any unauthorized access. You need to create a .txt file with PICOS security-related set CLIs. Security Config file is loaded to switch at the beginning of ZTP process.

  4. Click Add.

After you add the non-global System Config, you can do the following actions:

  • To view the switch information associated with the System Config, click View Associated Switch on the System Config page.

  • To apply a System Config to specific switches, click Manage Switch, select the switches, and click Save.

  • To remove a System Config, click View Associated Switch toconfirm whether the System Config is not in use by any switches. If yes, click Remove.

Note: If the System Config to be removed is still associated with switches, the removal will fail.