...
Configuration Name: The name of the configuration.
Device Default Login User: The default username of switches to be managed.
Device Default Password: The default password of the default user.
License Portal URL: https://license.pica8.com
License Portal User: The user ID for the License Portal.
License Portal Password: The password of the user for the License Portal.
Config Backup Number: Optional. The maximum backup number for the configuration snapshots.
Security Config File: The .txt file with PICOS security-related set CLIs.
Parking Security Config File: To eliminate any unauthorized access, switches in the parking lot need to be configured with an initial parking security configuration. That is, configurations in Initial parking security config file will be pushed to switches that already registered to AmpCon-Campus but without generated configurations.
Allow Switch Source IP: The IP ranges of switches that are allowed for AmpCon-Campus management.
Debug: Enable debug logs for server-side operations or not.
...
Figure 1. Adding a global System Config
...
Click Save.
Adding a Non-global System Config
To add a non-global System Config, follow these steps:
Log in to the AmpCon-Campus UI, and click Service > System Config.
Click the + icon. The Add NewConfigpage opens.
Enter the following information：
Configuration Name: The name of the configuration.
Device Default Login User: The default username of switches to be managed.
Device Default Password: The default password of the default user.
License Portal URL: https://license.pica8.com
License Portal User: The user ID for the License Portal.
License Portal Password: The password of the user for the License Portal. License Portal URL + License Portal User + License Portal Password are used to send requests to the License Portal.
Security Config File: The .txt file with PICOS security-related set CLIs.
...
Figure 2. Adding a non-global System Config
...
Click Add.
After you add the non-global System Config, you can do the following actions:
To view the switch information associated with the non-global System Config, click View Associated Switch on the System Config page.
...
Figure 3. Viewing switches associated with a System Config
...
To apply a non-global System Config to specific switches, click Manage Switch, select the switches, and click Save.
...
Figure 4. Adding or removing switches managed by a System Config
...
To remove a non-global System Config, click View Associated Switch toconfirm whether the System Config is not in use by any switches. If yes, click Remove.
Note: If the non-global System Config to be removed is still associated with switches, the removal will fail.
Figure 5.
...
Removing a non-global System Config
...