You can forward AmpCon™-Campus logs to other external syslog servers.
Prerequisite
You must enable the syslog service of the target server.
Procedure
To update the encrypt key, follow these steps:
Log in to the AmpCon-Ampus UI, and click Service > System Config.
On the “Global System Config”page, click Syslog Config.
Enter the following information:
IP: The IP address of the external syslog server.
Port: The port number of the external syslog server.
Protocol: TCP or UDP.
Level: SUCCESS or ERROR. The mapping rules of Ampcon-Campus Log levels and syslog rules are as follows:
SUCCESS is equal to info (level=6)
ERROR is equal to warning (level=4)
For example, if the ERROR level is specified, the syslog server receives logs with a warning level or higher from Ampcon-Campus.
...
Click Add.
Verifying Syslog Configurations
To verify whether AmpCon-Campus logs can be forwarded to the syslog server, follow these steps:
Log in to the AmpCon-Ampus UI, and click Service > System Config.
In the License Portal User field, enter an incorrect username, and click Save.
...
Access the AmpCon-Ampus server by using MobaXterm for verification.
...