You can forward AmpCon™-Campus logs to other external syslog servers.
Prerequisite
You must enable Ensure that the syslog service of the target server is enabled.
Procedure
To update the encrypt key, follow these steps:
Log in to the AmpCon-Campus UI, and click Service > System Config.
On the “Global System Config”page, click Syslog Config.
Enter the following information:
IP: The IP address of the external syslog server.
Port: The port number of the external syslog server.
Protocol: TCP or UDP.
Level: SUCCESS or ERROR. The mapping rules of Ampcon-Campus Log levels and syslog rules are as follows:
SUCCESS is equal to info (level=6)
ERROR is equal to warning (level=4)
For example, if the ERROR level is specified, the syslog server receives logs with a warning level or higher from Ampcon-Campus.
...
Click Add.
Verifying Syslog
...
Forwarding
To verify whether AmpCon-Campus logs can be forwarded to the syslog server, follow these steps:
...