You can forward AmpCon™-Campus logs to other external syslog Syslog servers.
Prerequisite
Ensure that the syslog Syslog service of the target server is enabled.
...
Log in to the AmpCon-Campus UI, and click Service > System Config.
On the “Global System Config”page, click Syslog Config.
Enter the following information:
IP: The IP address of the external syslog Syslog server.
Port: The port number of the external syslog Syslog server.
Protocol: TCP or UDP.
Level: SUCCESS or ERROR. The mapping rules of Ampcon-Campus Log levels and syslog Syslog rules are as follows:
SUCCESS is equal to info (level=6)
ERROR is equal to warning (level=4)
For example, if the ERROR level is specified, the syslog Syslog server receives logs with a warning level or higher from Ampcon-Campus.
...
To verify whether AmpCon-Campus logs can be forwarded to the syslog Syslog server, follow these steps:
...