...
In the AmpCon-DC UI, click System > User management.
Click TACACS+ Settings.
Click Enable to activate theTACACS+ service. In the The TACACS+ Settings pop-up window , enter is displayed.
...
Enter the following information:
Parameter | Description |
|---|---|
Enable |
...
Enable or disable TACACS+ authentication and authorization. | |
Primary Server IP |
...
The IP address of the primary TACACS+ server. | |
Secondary Server IP |
...
Optional. The IP address of the backup TACACS+ server. | |
Server Key |
...
The shared key of TACACS+. Note: The value of the Server Key field needs to be the same as the shared key of the primary and secondary TACACS+ servers. The shared key on both TACACS+ servers needs to be the same. | |
Session Timeout |
...
The TACACS+ connection timeout in seconds. | |
Auth Protocol |
...
The authentication protocol type of TACACS+ including ASCII, PAP or CHAP. | |
TACACS+ User Level Mapping |
...
The mapping ranges for TACACS+ authorization. The configuration page displays the default mapping values. You can configure a custom range for mapping values. The values are integers that range from 0 to15 |
...
. Notes:
|
Click OK.