Content Comparison

For a switch that is not deployed with AmpCon™-DC, you can also import the switch so that it can be managed by AmpCon-DC.

Prerequisites

• The switch to be imported hasn’t been managed by the AmpCon-DC server.

• The AmpCon-DC license includes the Hardware ID of the switch.

Importing a Switch with a Global User

1. In the AmpCon-DC UI, click Service > Switch.

2. Click Import Actions, and then select Import.

3. In the IP field, enter the IP address of the switch.

4. In the System Config drop-down list, select the appropriate System Config.

Note: The System Config needs to contain the username and password to log in to the switch.

...

4. Click OK.

5. In the AmpCon-DC UI, click Services > Switch. Check whether the switch status is shown as "Imported".

6. Click OK.

Importing a Switch with a Group User

1. In the AmpCon-DC UI, click Service > Switch.

2. Click Import Actions, and then select Import.

3. In the IP field, enter the IP address of the switch.

4. In the System Config drop-down list, select the appropriate System Config.

Note: The System Config needs to contain the username and password to log in to the switch.

5. In the Fabric drop-down list, select a fabric.

6. In the Group drop-down list, select a switch group.

...

7. Click OK.