...
| Table of Contents | ||
|---|---|---|
|
Prerequisites
...
Prerequisite
Click Service > Switch Model in the AmpCon™-DC UI, and check whether the PicOS® image to install is listed in the Deployed ONIE Image drop-down list.
If the image is not listed there, upload the PicOS® image and its MD5 file to AmpCon-DC. For more information, see Uploading Images.
If the image is listed there, you don’t need to upload the PicOS® image
...
and its MD5 file.
Configuring a Switch Model
...
In the AmpCon-DC UI, click Service > Switch Model.
Optional: Update the supported switch model list:
Click Update Switch Model.
Click Yes to confirm the update.
...
In the Switch Model drop-down list, select the switch model that you want to configure.
...
Configure the port number range for each speed.
In the Deployed ONIE Image drop-down list, select the PicOS® image that you want to install for this switch model.
...
Click Save.
Optional: Resetting a Switch Model
...
Note: After you reset the switch model, the port number range for each speed is set to zero, and the image for this switch model PicOS® image in the Deployed ONIE Image drop-down list is reset to the default versionbuilt-in image.
In the AmpCon-DC UI, click Service > Switch Model.
Click Reset.
Click Save.