...
Download and install MobaXterm.
Open MobaXterm, and then create a session to connect with the switch.
Reboot the switch by running the following command:
sudo reboot -f |
|---|
During the reboot process, when If you see the “Hit any key to stop autoboot: x”autoboot” message, press the Enter key to exit the autoboot mode.
If you don’t see this message, go to step 5 directly.
Reboot the switch.
For switches with the ONIE menu, reboot by using the ONIE menu.For switches without the ONIE menu, reboot select ONIE, and then select ONIE: Install OS.
...
For as4610 switches, reboot from ONIE by running the following command:
...
Then, the switch will be restarted and automatically register with the AmpCon-DC server.
Wait for the registration process to
...
be completed.
...
Log in to the AmpCon-DC UI, click Service > Switch. You can see the status of the switch is
...
Provisioning Success.
...
Provisioning an Integrated Hardware and Software Switch
...
The switch will automatically register with and connect to the AmpCon-DC server.
Wait for the registration
...
process
...
to be completed.
...
In the AmpCon-DC UI, click Services > Switch. Check whether the switch status is shown as
...
Provisioning Success
...
.
...