After you deploy a switchswitches, you can push configurations to the switch these switches by using the Push Config function.
...
If you haven’t added the switch configurations, add switch configurations with the configurations that you want to push to switches. For more information, see Adding Switch Configurations.
...
| Table of Contents | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Prerequisite
Ensure that you have created
...
the configuration templates that you want to push to each switch. For more information, see
...
Adding Configuration Templates.
...
Procedure
To push configurations to one or multiple switches, follow these steps:
...
Enter the configurations that you want to push to switches manually.
Using the configuration template templates that you created before:
a. Click Generate Config.
...
d. Click Save.
...
Click Push Config, and then select the switches to apply these configurations.
You can select switches one by one by using the Config Switch tab or select all switches in a group by using the Config Group tab. For how to add groupsa group or manage switches in a group, see Managing Groups.
...
Click OK to start the configuration pushing.
Optional: Verifying the Pushing
...
Status and Log
To verify whether the configuration is pushed to each switch successfully, follow these steps:
In the AmpCon-DC UI, click Service > Configuration Template.
In the Push Config tab, click Push Config Logs.
Click Task List, check whether the pushing status is “success” success.
If the pushing status is not “success” success, click Push Log to check logs for troubleshooting.