Page Comparison

After switches are successfully deployed or imported with AmpCon-Campus, you can push configurations to these switches as needed.

Prerequisite

Ensure that you have created the configuration templates to push to each switch. For more information, see Configuring Configuration Templates.

Procedure

To push configurations to one or multiple switches, follow these steps:

1. In the AmpCon-Campus UI, click Service > Config Template.

2. In the Push Config tab, select a folder, and then click Add Node. A node represents a configuration file.

3. Enter the node name and its description (optional).

4. Click OK to save the node.

5. Click the node that you just created, and click Edit.

Image Removed

Image Added

7. Add configurations to push to switches by using either of the following ways:

• Enter the configurations manually.

• Using the configuration templates that you created before:
  a. Click Generate Config.

b. Select a configuration template file from the drop-down list.

c. Click Next, and enter the value for each variable.

d. Click Save.

Image Removed

Image Added

8. Click Push Config, and then select the switches to apply these configurations.

You can select specific switches in the Config Switch tab or select a group in the Config Group tab. For how to add a group or manage switches in a group, see Managing Groups.

Image Removed

Image Added

9. Click OK to start the configuration pushing.

Optional: Verifying the Pushing Status and Log

To verify whether the configuration is pushed to each switch successfully, follow these steps:

1. In the AmpCon-Campus UI, click Service > Config Template.

2. In the Push Config tab, click Push Config Logs.

3. Click Task List, check whether the pushing status is success.

4. If the pushing status is not success, click Push Log to check more pushing details for troubleshooting.