...
| Table of Contents | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Prerequisites
Before you install the AmpCon-DC server, ensure that the following prerequisites are met:
The installation requirements are met.
The AmpCon-DC server installation package is downloaded.
Go to the FS AmpCon-DC website. In the Resources section, click the installation package that you want to install.
...
- AmpCon™-DC for VMWare ESXi GNS3 2.1.0 Software
Used to install the AmpCon-DC server in VMWare ESXi
- AmpCon™-DC for VirtualBox 2.1.0 Software
Used to install the AmpCon-DC server in VirtualBox
- AmpCon™-DC for Ubuntu Docker 2.1.0 Software
Used to install the AmpCon-DC server in a physical machine based on Ubuntu 22.04 with Docker
- AmpCon™-DC for GNS3 2.1.0 Software
Used to install the AmpCon-DC server in GNS3
Installing in VirtManager
Download the AmpCon-DC QCOW2 image as described in the Prerequisite section.
...
.
...
Installing in VirtManager
Go to the directory where the AmpCon-DC server installation package exists.
...
Open the Virtual Manager interface by running the following command:
virt-manager |
|---|
Click the following button as follows to import the virtual machine.
...
Select "import Import existing disk image" , and then click "Forward".
...
Click "Browse" to select the local image fileAmpCon-DC server installation package that you downloaded.
...
Click "Browse Local" to add a local location.
...
Find the actual .qcow2 mirror file location, and then click "Open"
Click "Forward"
Click "Forward"
...
.
...
Choose the operating system to install, and then click Forward.
...
Adjust the virtual machine configuration as needed, and then click "Forward".In the
...
...
In the Network section, select Host Macvtap device ens160: macvtap and click "Finish"
...
, and enter the device name as you need. Then, click Finish.
...
Wait for the
...
installation process to complete. Then, you will automatically enter the virtual machine
...
command line
...
.
...
Modify the network interface configuration
...
Enter username and password: pica8/pica8
...
.
a. Log in to the virtual machine with the default username (pica8) and password (pica8).
b. Modify the IP address by running the following command:
sudo vi /etc/netplan/00-installer-config. |
|---|
...
Enter the command “sudo netplan apply” to apply the network interface configuration
...
yaml |
|---|
...
c. Apply the network interface configuration by running the following command:
sudo netplan apply |
|---|
Start the AmpCon-DC server by running the following command:
cd /usr/share/automation/server && sudo ./start. |
|---|
...
sh |
|---|
...
Page Authentication
Enter the IP address of AmpCon™-DC in the browser
...