...
Installing in VirtManager
Download the AmpCon-DC QCOW2 image as described in the Prerequisite section.
...
Run the following command to open the Virtual Manager interface:
virt-manager |
|---|
Click the button as follows to import the virtual machine.
...
Select "import existing disk image" and click "Forward".
...
Click "Browse" to select the local image file.
...
Click "Browse Local" to add a local location
...
Find the actual qcow2 mirror location and click "Open"
Click "Forward"
Click "Forward"
...
Adjust the virtual machine configuration as needed and click "Forward"
In the
...
In the Network section, select Host device ens160: macvtap and click "Finish"
...
Wait for the creation to complete, automatically enter the virtual machine serial command line, the import is complete
Modify configuration settings
Enter username and password: pica8/pica8
Enter the command “sudo vi /etc/netplan/00-installer-config.yaml” to modify the IP address
Enter the command “sudo netplan apply” to apply the network interface configuration
...
Start AmpCon™-DC
Enter the command “cd /usr/share/automation/server && sudo ./start.sh” to start the AmpCon™-DC service.
Page Authentication
Enter the IP address of AmpCon™-DC in the browser
...
Installing in VirtualBox
...
For detailed installation steps, see the child topic Installing in VirtManager.
Installing in VirtualBox
For detailed installation steps, see the child topic Installing in VirtManager.
Installing in VMware ESX
For detailed installation steps, see the child topic Installing in VirtManager.
Installing in a physical machine (Ubuntu 22.04 with Docker)
For detailed installation steps, see the child topic Installing in VirtManager.