...
| Table of Contents | ||
|---|---|---|
|
Prerequisite
Click Service > Switch Model in the AmpCon-DC UI, and then check whether the PicOS image to install is listed in the Deployed ONIE Image drop-down list.
If the image is not listed there, upload the PicOS image and its MD5 file to AmpCon-DC. For more information, see Uploading Images.
If the image is listed there, you don’t need to upload the PicOS image and its MD5 file.
Configuring a Switch Model
...
To reset a switch model, follow these steps:Note:
In the AmpCon-DC UI, click Service > Switch Model.
Click Reset.
Click Save.
After you reset a switch model, the port number range for each speed is set to zero, and the PicOS image in the Deployed ONIE Image drop-down list is reset to the built-in image.
...
In the AmpCon-DC UI, click Service > Switch Model.
...
Click Reset.
...
.