...
PicOS can run in 2 different modes of operation:
- Open vSwitch (OVS) Mode: In this mode, PicOS is dedicated and optimized for OpenFlow applications.
- Layer 2/Layer 3 (L2/L3) Mode: In this mode, PicOS can run switching and routing protocols, as well as OpenFlow applications.
In OVS mode, L2/L3 daemons are not running, and the system is fully dedicated to OpenFlow and OVS. In L2/L3 mode, L2/L3 daemons are running, and OVS can also be used if OpenFlow in Crossflow Mode is activated.
This chapter assumes that user is running PicOS L2/L3 mode. Please see PICOS Mode Selection to learn how to switch between L2/L3 and OVS modes.
| Info | ||
|---|---|---|
| ||
On N3048EP-ON, N3048ET-ON, N1148T-ON and N3132PX switches, run "copy running-config startup-config" command when set L2 / L3 CLI commands. Otherwise, the L2 / L3 configuration will be lost after PicOS reboot. For detail, please refer to Configuration Saving Guide. |
| Child pages (Children Display) | ||||
|---|---|---|---|---|
|
...