...
The run mtrace command displays multicast traceroute towards specified IPv4 source and group address.
Command Syntax
run mtracesource<ipv4-src-addr> [< ipv4group <ipv4-group-addr >addr>]
Parameters
Parameter | Description |
source <ipv4-src-addr> | Specifies the source IPv4 address to trace. |
group <ipv4-group- |
addr> | Optional. Specifies the group IPv4 address to trace. |
Example
- The following example traces with multicast source:
Code Block |
---|
admin@Xorplus#admin@PICOS# run mtrace source 1.1.1.100 * Mtrace from 1.1.1.100 to 53.53.53.5030 via group 0.0.0.0 Querying full reverse path... * switching to hop-by-hop: 0 dynamic-005-005-005-050.5.5.pool.telefonica.de (5.5.5.50) -1 dynamic-005-005-005-005.5.5.pool.telefonica.de (5.5.5.5) PIM thresh^ 1 -2 ? (4.4.4.4) PIM thresh^ 1 -3 0 ? (3.3.3.30) -1 ? (3.3.3.3) PIM thresh^ 1 Round trip time 93 ms; total ttl of 31 required. |
- The following example traces with multicast source and group address:
Code Block |
---|
admin@Xorplus#admin@PICOS# run mtrace source 1.1.1.100 group 224.1.1.1 * Mtrace from 1.1.1.100 to 53.53.53.5030 via group 224.1.1.1 Querying full reverse path... * switching to hop-by-hop: 0 dynamic-005-005-005-050.5.5.pool.telefonica.de (5.5.5.50) -1 dynamic-005-005-005-005.5.5.pool.telefonica.de (5.5.5.5) PIM (S,G) thresh^ 1 -2 ? (4.4.4.4) PIM (RP) (S,G) thresh^ 1 -3 0 ? (3.3.3.30) -1 ? (3.3.3.3) PIM (S,G) thresh^ 1 Round trip time 63 ms; total ttl of 31 required. |
In the display result, "0" represents the switch currently executing mtrace, "-1" represents the first hop starting from the current switch and its interface IP address is 53.53.53.53.