...
We can enable MVRP function for dynamic VLAN creation to reduce the workload of VLAN configuration. To achieve MVRP dynamic VLAN registration, first statically configure the access interface of Switch A and Switch C to join VLAN 200 and 300, then enable global MVRP function and the interface MVRP function on Switch A, Switch B and Switch C.
| Info |
|---|
|
- To achieve MVRP bidirectional VLAN registration process, VLAN 200 and 300 need to be statically configured on the host-side interfaces of Switch A and Switch C, say ge-1/1/1 on Switch A and ge-1/1/2 on Switch C.
- MVRP is not allowed to be enabled on the host-side interfaces of the access devices, say ge-1/1/1 on Switch A and ge-1/1/2 on Switch C. However, MVRP needs to be enabled on ge-1/1/2 of Switch A, ge-1/1/1 of Switch C and all interfaces of Switch B .
- The port mode of MVRP interfaces should be Trunk type.
|
...