...
We can enable GVRP function for dynamic VLAN creation to reduce the workload of VLAN configuration. To achieve GVRP dynamic VLAN registration, first statically configure the access interface of Switch A and Switch C to join VLAN 200 and 300, then enable global GVRP function and the interface GVRP function on Switch A, Switch B and Switch C.
| Info |
|---|
|
- To achieve GVRP bidirectional VLAN registration process, VLAN 200 and 300 need to be statically configured on the host-side interfaces of Switch A and Switch C, say ge-1/1/1 on Switch A and ge-1/1/2 on Switch C.
- GVRP is not allowed to be enabled on the host-side interfaces of the access devices, say ge-1/1/1 on Switch A and ge-1/1/2 on Switch C. However, GVRP needs to be enabled on ge-1/1/2 of Switch A, ge-1/1/1 of Switch C and all interfaces of Switch B .
- The port mode of GVRP interfaces should be Trunk type.
|
...