...
The delete protocols static route command removes the static route.
Note:
- If you are configuring a default route in the default VRF, you need to enable management VRF (After enabled by using command set system management-vrf enable true, eth0 will automatically be moved to management VRF from default VRF) to ensure the normal access to eth0 management port.
- When configuring IPv6 static route on FS S5810 Series and S5860 Series switch, the value of “prefixlen” should be less than or equal to 64.
Command Syntax
set protocols static [vrf<vrf-name>] route <ip/prefixlen> {next-hop <nexthop-address> | blackhole | null0 | reject} [distance <distance> | tag <tag>]
...