Versions Compared

Old Version 1

changes.mady.by.user Tracy Yang

Saved on

compared with

New Version Current

changes.mady.by.user Tracy Yang

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

The set interface ecmp hash-mapping dynamicround-robin-load-balancing command enables Dynamic Load Balancing for round robin mode of ECMP (Equal-Cost Multi-Path Routing) load balancing. That is, each equivalent route to the same destination address alternately forwards the traffic. For known unicast, if the packets have approximately the same length, you can choose to configure round-robin-based per-packet load balancing to achieve traffic load balancing.

The delete interface ecmp hash-mapping dynamicround-robin-load-balancing command deletes the configuration.

Info

  • When the ECMP hash-mapping mode configuration (set/delete) changes, a system restart is required for the configuration to take effect.

  • ECMP hash-mapping modes (round-robin-load-balancing, randomized-load-balancing, symmetric and dlb-normal)are mutually exclusive. To switch between modes, you must first delete the configured mode before setting up the new one. Then, restart the system for the configuration to take effect.

Command Syntax

set interface ecmp hash-mapping dynamicround-robin-load-balancing

delete interface ecmp hash-mapping dynamicround-robin-load-balancing

Parameter

Null.

Usage Guidelines

After enabling the dynamic load sharing function, the traffic of Equal-Cost Multi-Path Routing (ECMP) can be distributed to different member links through dynamic load sharing, ensuring load balancing between member links.

Example

  • Enable Dynamic Load Balancing for ECMP (Equal-Cost Multi-Path Routing).

Example

  • Enable round robin mode of ECMP load balancing.

Code Block
admin@PICOS# set interface ecmp hash-mapping dynamicround-robin-load-balancing
admin@PICOS# commit
admin@PICOS# exit
admin@PICOS> request system reboot