Info | ||
---|---|---|
| ||
|
In L2/L3, ECMP is supported. The maximum ECMP outgoing port group is 4*128. If each ECMP route is configured to have up to 4 equal-cost paths, for example, the maximum ECMP outgoing port group support is 128. If each ECMP route is configured to have up to 16 equal-cost paths, the maximum ECMP outgoing port group support is 32. Several different ECMP routes can share the same outgoing port group. After configuring the ECMP equal-cost path maximum, reboot the switch to make it available.
...
Info |
---|
When you configure ECMP hash mode, follow these restrictions and guidelines:
|
...
Code Block |
---|
admin@PICOS# set interface ecmp hash-mapping randomized-load-balancing admin@PICOS# commit admin@PICOS# exit admin@PICOS> startrequest shell sh admin@PICOS:~$ sudo systemctl restart picossystem reboot |
Enable round robin mode of ECMP load balancing.
Code Block |
---|
admin@PICOS# set interface ecmp hash-mapping round-robin-load-balancing admin@PICOS# commit admin@PICOS# exit admin@PICOS> startrequest shell sh admin@PICOS:~$ sudo systemctl restart picossystem reboot |
Enable normal mode of Dynamic Load Balancing for ECMP.
Code Block |
---|
admin@PICOS# set interface ecmp hash-mapping dlb-normal admin@PICOS# commit admin@PICOS# exit admin@PICOS> startrequest shell sh admin@PICOS:~$ sudo systemctl restart picossystem reboot |
Enable Symmetric Hash for ECMP.
Code Block |
---|
admin@PICOS# set interface ecmp hash-mapping symmetric true admin@PICOS# commit admin@PICOS# exit admin@PICOS> startrequest shell sh admin@PICOS:~$ sudo systemctl restart picossystem reboot |