...
The set routing route-map match peer command matches the peer ip address if the BGP neighbor was specified in this manner. This is a BGP specific match command.
The delete routing route-map match peer command restores the default behavior of not matching the peer ip address if the BGP neighbor of the route.
...
set routing route-map <route-map-name> > order <NUMBER> match peer {ipv4-addr <ipv4-address>|ipv6-addr <ipv6-address> | local}
delete routing route-map <route-map-name> name> order <NUMBER> match peer {ipv4-addr <ipv4-address>|ipv6-addr <ipv6-address> | local}
Parameter
Parameter | Description |
route-map <route-map-name> | Specifies the name of the route map. Required. |
order <NUMBER> | Specifies the sequence number of the entry. Required. The value is an integer that ranges from 1 to 65535. |
peer {ipv4-addr <ipv4-address>|ipv6-addr <ipv6-address>|local} | Specifies if the peer ip address if the BGP neighbor is matched with a match clause. |
...
| Code Block |
|---|
admin@Xorplus# set routing route-map GlobalMap order 10 match peer ipv4-addr 100.100.100.1 admin@Xorplus# set routing route-map GlobalMap order 10 actionmatching-policy permit admin@Xorplus# commit |
...