...
- Both static and LACP LAGs can support the hashing of traffic using the Src/Dst MAC address, the Src/DstIP address, and Layer 4 port information.
- If all member ports of a LAN are link-down, the LAG will be link-down. The LAG will become link-up when at least one member port is link-up.
- The logical function and configuration of LAGs are same as those of a physical port.
Configuring Static LAGs
The name of the LAG interface is a string in the format of aex, where x is an integer ranging from 1 to 4094.
| Info |
|---|
The maximum LAGs per switch is limited by the interface capacity. |
| Code Block |
|---|
admin@XorPlus# set interface aggregate-ethernet ae1 admin@XorPlus# set interface gigabit-ethernet ge-1/1/1 ether-options 802.3ad ae1 admin@XorPlus# set interface gigabit-ethernet ge-1/1/2 ether-options 802.3ad ae1 admin@XorPlus# set interface gigabit-ethernet ge-1/1/3 ether-options 802.3ad ae1 admin@XorPlus# set interface gigabit-ethernet ge-1/1/4 ether-options 802.3ad ae1 admin@XorPlus# commit Waiting for merging configuration. Commit OK. Save done. admin@XorPlus# |
Displaying Static Static LAG Information
| Code Block |
|---|
admin@XorPlus# run show interface aggregate-ethernet ae1 Physical interface: ae1, Enabled, Physical link is Up Interface index: 53 Port mode: access Description: Link-level type: Ethernet, MTU: 1514, Speed: Auto, Duplex: Auto Source filtering: Disabled, Flow control: Enabled, Auto-negotiation: Enabled Interface flags: Hardware-Down SNMP-Traps Internal: 0x0 Current address: c8:0a:a9:9e:14:9f, Hardware address: c8:0a:a9:9e:14:9f Traffic statistics: Input Packets............................176 Output Packets...........................16 Input Octets.............................12888 Output Octets............................1594 Aggregated link protocol: STATIC Members Status Port Speed --------- -------- ---------- ge-1/1/1 Down Auto ge-1/1/2 Down Auto ge-1/1/3 Up Auto ge-1/1/4 Up Auto |
...