...
To back up configurations for a single switch, follow these steps:
In the AmpCon™AmpCon-DC UI, click Service > Configuration Config Template.
In the Config Backup tab, locate a switch, and then click Backup Config.
...
Optional: Check whether the backup file is created successfully.
Locate a switch, and then click Snapshot List.
Check whether the backup file is in the snapshot list.
To see the configuration details, click Snapshot List.
Backing up Configurations for a Group of Switches
...
In the AmpCon-DC UI, click Service > Configuration Config Template.
In the Config Backup tab, select the group to back up, and then click Backup Config.
...
Optional: Check whether the backup files are file for each switch is created successfully.
Locate each a switch, and then click Snapshot List.
Check whether the backup file is in the snapshot list.
To see the configuration details, click Snapshot List.
Backing up Configurations Automatically
...
In the AmpCon-DC UI, click Service > Configuration Config Template.
In the Config Backup tab, set the following schedulebackup interval and time:
Interval Days: The interval in days between each backup
Hours: The time in hour to do the backup
...
In the AmpCon-DC UI, click Service > Configuration Config Template.
In the Config Backup tab, locate a switch, and then click Snapshot List.
Select Locate the configuration to roll back, and then click "Rollback Config" for that configuration.
...
Set the wait time in seconds. The default value is 10.
Click Save.
Optional: Viewing
...
Backup Logs
To view configuration backup logs on a switch, follow these steps:
In the AmpCon-DC UI, click Service > Configuration Config Template.
In the Config Backup tab, locate a switch, and then click Log.
...
...
Optional: Viewing All Configurations on a Switch
To view detailed configurations on a switch, follow these steps:
In the AmpCon-DC UI, click Service > Config Template.
In the Config Backup tab, locate a switch, and then click Config.
Optional: Viewing or Deleting
...
Backup Configuration Files
To view the list of backup configuration files or delete a backup configuration filefiles, follow these steps:
In the AmpCon-DC UI, click Service > Configuration Config Template. In the Config Backup tab, locate a switch, and then click Snapshot List. You can see all available backup configuration files for the switch.
To see the view configuration details, click Snapshot List.
To delete a backup configuration file, click Delete.
...
Optional: Uploading Local Configuration Files
To You can upload a loca local switch configuration file to AmpCon-DC. After you upload the configuration file, the uploaded configurations can’t be pushed to the switch directly but can be pushed to the new switch during the Returning Merchandise Authorization (RMA) process.
If you didn’t back up configurations but uploaded a local configuration file before, when you RMA, the uploaded configurations will be pushed to the new switch.
If you backed up configurations and also uploaded a local configuration file before, when you RMA, the backup configurations will be pushed to the new switch.
To upload a local configuration file, follow these steps:
In the AmpCon-DC UI, click Service > Configuration Config Template.
In the Config Backup tab, locate a switch, and then click Upload Config.
...
Select a .boot file with switch configurations and upload it.
...
Click Config. In the pop-up window, check whether the uploaded configurations are added.
...
Optional: Setting Golden Config
The backup file with Golden Config will never be deleted. When the switch operation is compromised, the backup file with Golden Config is used to roll back a switch. You can also use the Golden Config as the basis to run an automated compliance check to verify whether the network switch is operating as designed by comparing running configurations with the backup configuration file with Golden Config.
To set Golden Config, follow these steps:
In the AmpCon-DC UI, click Service > Configuration Config Template.
In the Config Backup tab, locate a switch, and then click Snapshot List.
Locate a backup file, and then click Set Golden Config.
Optional: Adding or Deleting Configuration File Tags
You can add or delete historical tags for a backup configuration file tags. Follow these steps:
In the AmpCon-DC UI, click Service > Configuration Config Template. In the Config Backup tab, locate a switch, and then click Snapshot List. Locate a backup snapshot, and then click Tag Management.
To add a historical configuration file tag, enter the tag name, and then click Add > Save.
...
To remove delete a historical configuration file tag, locate the tag to be deleted, click the removal deletion icon, and then click Save.
Optional: Viewing All Configurations on a Switch
To view detailed configurations on a switch, follow these steps:
...
In the AmpCon-DC UI, click Service > Configuration Template.
...
.