...
The URL, username, and password of the License Portal. The information is used to send requests to the License Portal.
Default username and password of switches to be managed. The information is used to access the switches.
A security configuration file with PicOS security-related set CLIs. Before you deploy and configure a switch, the switch needs to be configured with an initial security configuration to eliminate any unauthorized access. Security Config file is loaded to switch at the beginning of switch deployment.
A parking security configuration file, which is used to push initial parking security configuration for those switches in the parking status. This configuration is not included in the non-global system configuration,.
The maximum backup number for the configuration snapshots. This configuration is not included in the non-global system configuration,.
The IP ranges of switches that are allowed for AmpCon-Campus management. This configuration is not included in the non-global system configuration,.
Whether to enable debug logs for server-side operations or not. This configuration is not included in the non-global system configuration,.
Adding a Global System Configuration
...
Configuration Name: The name of the configuration.
Device Default Login User: The default username of switches to be managed.
Device Default Password: The default password of the default user.
License Portal URL: https://license.pica8.com
License Portal User: The user ID for the License Portal.
License Portal Password: The password of the user for the License Portal. License Portal URL + , License Portal User + , and License Portal Password are used to send requests to access the License Portal.
Security Config File: The .txt file with PicOS security-related set CLIs.
...
To apply a non-global system configuration to specific switches, click Manage Switch, select the switches, and then click Save.
...
To remove a non-global system configuration, click View Associated Switch toconfirm check whether the system configuration is not in use by associated with any switches or not. If yesnot, click Remove.
Note: If the non-global system configuration to be removed is still associated with some switches, the removal will fail. You need to click Manage Switch to unselect these switches first.