You can compare running configurations with initial configurations on the same switch.
...
Check the Mgmt IP column on the “Switch” page, and ensure that the switch to compare is connected.
√: The switch is disconnected.
x: The switch is connected.
...
Ensure that the switch to compare is not in Imported status on the “Switch” page.
Note: After you Return Merchandise Authorization (RMA) to replace an imported switch with a new switch, the new switch is shown as Provisioning Success. However, you can’t compare running configurations with initial configurations on this new switch.
This is because the new switch is configured by using the backup configuration file or uploaded configurations of the imported switch during the deployment process, instead of by creating a switch configuration.
Procedure
In the AmpCon-DC UI, click Service > Config Template.
In the SN field, click Select.
...
Running Config(set format): Displays configurations as the show | display set command result in the switch
Running Config(all set format): Displays configurations as the show all | display set command result in the switch
Then, you can see differences between the running configurations and the initial configurations on the switch.
...